Class 5 MOT Brake Roller Regritting Kit

COMMERCIAL ROLLERS

If you carry out Brake Testing, there's a Kit designed to keep the gritted surfaces of your equipment in peak condition at all times. They're designed for the waste-free repair of a patch, a roller, or all four rollers, as required. A Kit means one less expensive servicing problem. This is especially true for Commercial Rollers. The new One Day kits, originally designed for engineers, reduce downtime to overnight. Special Kits using Very Coarse Grit can be supplied for Rollers subjected to very dirty tyres.

WHY SHOULD I USE A THIS KIT?

Kits use MiniMixes - small accurate, easy to make mixes, avoiding waste, even for small patches.
Four sizes of kits are available with material for 1 to 4 full rollers, or the equivalent area of patches.
Unused material keeps until the next job. Kits have been successfully used for up to 10 years!
Using this Kit saves a high proportion of the cost of having new rollers fitted or existing ones regritted.
Coatings last at least a year, usually three or four, before minor, easily repairable wear occurs.
Kits are self contained and easy to use and bring Regritting into the normal planned maintenance schedule.
Repairs are completed overnight or within the weekend shutdown period, summer or winter using the one day kit.
Older standard (48hr) kit is still available if required.
Repairs can be carried out with or without removing rollers.
Prepare as for painting - use a needle gun, angle grinder, or shot blaster.
Effective winter or summer, just gently warm the rollers in winter.
Can be used as a general purpose Non-Slip product if required.
Need any technical backup? Give us a call or message

HOW DO I USE THE KITS?

Clean Rollers.
Mix Bonding Agent, Hardener & Thickener & brush on.
Apply Ceramic Grit.
Allow to stiffen & repeat steps 2 & 3.
Cure overnight.
Back in use.

This kit will do all 4 rollers.