Rear Axle Bush Tool In Plastic Carry Case - Ford Fiesta 1996 onwards > and Ford Ka

Easily removal assembly of the rear axle mounting bushes as fitted to Ford Fiesta IV models 1996>
Suitable to use on the vehicle without removing the rear trailing link assembly from the car.

Instructions for use...

Securely support vehicle and take off the rear wheels to get to the trailing link suspension arm assembly. Locate the bush using your workshop manual for guidance.

Apply lubricant to the bush for easy removal. Also apply to tool after every use.

With the unit Assembled and holding the rear nut with a spanner and making sure the tool is correctly lined up use a deep 24mm socket *Not Air Impact* on the front nut of the thrust bearing assembly to take out the old bush.

• Remove/install Fiesta IV rear axle mounting bushes.
• Can be used in situ - no need to remove trailing link assembly from vehicle.
• Applications: Ford; Fiesta IV (96on), Ka.
• Supplied in carry-case.